PSC WindBoss The PSC WindBoss series of microphone windshields represent a simple, flexible and accommodating means of proving wind rumble rejection for your condenser microphones. These new microphone windshields provide the benefits of traditional, hard-shelled windshields without the associated expense and single application restrictions. The new PSC WindBoss series of microphone mounting suspensions that allow the PSC Wind Boss to be used with virtually any condenser microphone. This mounting system does not rely on specialized, single application mounting clips, adapters or hard to install elastic bands. The PSC WindBoss uses simple, effective silicone rubber o-ring to provide an excellent shockmount for your microphones. These special bands are custom made to our specifications and are virtually unaffected by changes in temperature and humidity. In addition, they provide an easy and quick means of changing microphones without the parts breakage associated with traditional mounts. The PSC WindBoss series of microphone windshields are made of lightweight, applications specific, open cell foam and a rugged aircraft aluminum frame. These two elements allow PSC to offer you a reasonably priced alternative to traditional windscreens. The design of the WindBoss outer foam shell is made up of three pieces, a center section and two end caps. These two end caps are interchangeable and allow access to both ends of the windshield . These ends caps are easily removed and replaced thanks to their Velcro fastening system. The center section and its associated framework are available in two sizes providing wind protection for a multitude of microphones. Specifications: Description: Small Size: 13 in L x 4 in D (33cm x 10cm) Weight: 6.4 oz (182g) Description: Medium Size: 16 in L x 4 in D (41cm x 10cm) Weight: 7.8 oz (222g) Material -Frame: 0.050 in (1.27mm) Aircraft aluminum -Shell: Application specific polyurethane open cell foam -Cover: Nylon synthetic fur -Mounting: 3/8 in -16 female thread Warranty: One year, limited