Sennheiser ME 67 Black-Electret Microphone Capsule
SSMME67
The ME 67 is a long shotgun microphone capsule designed for use with the K6 and K6P powering modules. A highly directional microphone, it can be used where the microphones must be placed at a distance from the sound source.
Call For Price The ME 67 is a long shotgun microphone capsule designed for use with the K6 and K6P powering modules. A highly directional microphone, it can be used where the microphones must be placed at a distance from the sound source. Matt black, anadised, scratch-resistant finish.
The K6 powering module is at the heart of Sennheiser's professional condenser microphone modular system and can be powered either by its internal 'AA' size 1.5 V battery or by 12- 48 V phantom power.
The K6P is similar to the K6 powering module but is powered by 12- 48 V phantom power only, for use where battery power is not required (e.g. permanent installations).
Features:
Lobar pick-up pattern
Highly direction
Low inherent self-noise High sensitivity factor
Wide frequency response Supply schedule:1 ME 67
Technical Data: Pick-up pattern: Lobar (long gun) Frequency response: 40-20,000 Hz +/- 2.5
Sensitivity (free field, no load) (1 kHz): 35mV/Pa +/- 2.5 dB
Nominal impedance: 200 ohms (with K6)
Min. terminating impedance: 1000 ohms (with K6)
Equivalent noise level A weighted (DIN IEC 651) CCIR-weighted (CCIR 468-3): 16db 27DB
Max. SPL (1kHz): 125 dB (THD=1%)
Dimensions in MM: O 22.5 x 343
CHOOSE MODEL:
!
<<
|
|