XLR - XLR Interconnection Cable with 40 dB Attenuation Switch50-cm (12-inch) XLR-F to XLR-M cable with integrated 15 dB of attenuation switch. Uses Neutrik FXS Type switch at the XLR-M connector. Used to input line level sources into MP-1, MP-2, and MixPre. Also useful to output microphone level signals from an MP-2 or MixPre. Built for sound Devices by AVCable.com.General Description:The XL-40 is a high-quality interconnect designed primarily for Sound Devices MixPre and MP-2 field production products. Built for Sound Devices by AVCable.com, the XL-40 enables the line level outputs of a MixPre or MP-2 to interface with microphone level inputs. The XL-40 is also used to interface line level outputs to the microphone level inputs of MixPre or MP-2. A Neutrik FXS series switch at the male connecter houses the attenuation circuitry. Its 50-cm length fits inside a production bag for tidy cabling.Features:High-Quality Cable & Connectors:Low compacitance, highly flexible Belden 1800F cable with superior EMI rejection.Neutrx XLR connectorsAttenuation Switch:Neutrx FXS switch in barrel of male connector.Useful in either attenuation (-40 dB) or no attenuation (0 dB) positions.50-cm Length:Useful for direct interconnection, or used in-line with additional cabling.Specifications:Attenuation:0 dB (LINE position), 40 dB (MIC position) switch selectable Impedance:Input - 1k ohmOutput - 150 ohmLength:50-cm (20-inch), approximate, from connector to connector